Printable Area (Roll Paper, Slip Paper) - Epson TM-930II Series Operator's Manual

(2) Receipt feed switch
Feeds the receipt paper based on the line feed parameters set by
[Function]
ESC 2 and ESC 3 when this switch is pushed once. If the switch
is held, the printer executes continuous line feeding.
[Note]
l
(3) Journal feed switch
[Function] Feeds the journal paper based on the line feed parameters set by
ESC 2 and ESC 3 when this switch is pushed once. If the switch
is held, the printer executes continuous line feeding.
[Note]
l
l
n
Reset switch
[Function] Resets the printer.
[Nate]
l
When the ON-LINE switch is enabled, the Receipt feed switch
can be used only when the printer is OFF-LINE. When the ON-
LINE switch is disabled, the receipt feed switch is always valid.
Since the paper is fed after the carriage is moved to the center
of the receipt paper roll, special attention is required when the
cover is open.
When the ON-LINE switch is enabled, the journal feed switch
can be used only when the printer is OFF-LINE. When the ON-
LINE switch is disabled, the journal feed switch is always valid.
Since the paper is fed after the carriage is moved to the center
of the journal paper roll, special attention is required when the
cover is open.
This switch is located at the inner right-side of the ribbon cover.
It should be noted that the RAM will be completely initialized if
the printer is reset using this switch.
29