Main Assembly 4 (Case Unit); Inserting The Cables; Main Assembly 5 (Case Unit); Lower Case Assembly - Epson TM-U200 series Technical Manual

C o n fid e n tia l

Main Assembly 4 (Case Unit)

Inserting the cables

1. Insert the lead wires of the print head FPC, the sensor assembly, and the auto-cutter
assembly into the connectors.
2. Insert the paper feed motor cable into CN6 and the carriage motor cable into CN5. At this
time, make sure to insert the cables so that black or red colored side connects to the pin 1
side of each connector.
Print head FPC
Make sure not to confuse paper feed motor cable and carriage motor cable. Also check that
the black or red side of each cable is on the pin 1 side of the connector.

Main Assembly 5 (Case Unit)

Lower case assembly

1. Attach the lower case to the printer mechanism assembly. It is easy to assemble if you first
place portion B of the lower case under portion A of the upper plate.
Rev. A
Carriage motor cable
Red cable
Black cable
Paper feed
motor cable
CN6 CN5
(Pin 1 side)
TM-U200 Series (Type B) Technical Manual
Main circuit
board assembly
Sensor assembly's lead wires
Auto-cutter assembly's lead wires
Disassembly, Assembly, and Adjustment 5-33