Using The Compaq Utilities Menu; Configuration And Diagnostics; Computer Setup - Compaq Deskpro 2000 Series Reference Manual

Using the Compaq Utilities Menu

Configuration and Diagnostics

Computer Setup

-4
3 Using Compaq Utilities
3. Review, print, and, if necessary, discuss this information
with your authorized Compaq reseller or service provider.
To print the information, click File, then click Print. Select
one of the following options: Detailed Report (All
Categories), Summary Report (All Categories), or Current
Category. Click OK to print the report you selected.
4. To exit Compaq Diagnostics for Windows, click File, then
click Exit.
To access the Compaq Utilities menu:
1. Turn on or restart the computer by pressing
Ctrl+Alt+Delete at the same time.
It is recommended that you not restart your computer using
Ctrl+Alt+Delete while in Windows. Instead, exit Windows
then restart the computer.
2. When the cursor blinks in the upper-right corner of the
screen, press F10.
The cursor blinks in the upper-right corner of the screen for
approximately two seconds. If you do not press F10 during this
time, you must restart the computer.
3. Press Enter to bypass the title and welcome screens. The
Compaq Utilities menu appears.
This section describes the options available in Compaq Utilities.
When using these utilities, see the online help for specific
information.
Use Computer Setup in the following instances:
To verify configuration parameters when resolving
problems.
To get an overview of the computer's hardware.
To modify settings for graphics, processor, memory, audio,
storage, communications, and input devices.
To enable or disable the diskette drive.