Table of Contents
Advertisement
Chapter 3
Configuring the UPS for EBMs
EATON Powerware
Operation
This chapter contains information on how to configure the UPS for
Extended Battery Modules (EBMs) and initiate the battery test.
To ensure maximum battery runtime, configure the UPS for the correct
number of EBMs:
1.
Select MENU from the UPS system status screen, then select
SETUP, USER SETUP, and BATTERY PACK.
2.
Use the
or
button to select the number of battery packs in
your UPS configuration:
All UPS and EBM Cabinets
UPS + 1 EBM
UPS + 2 EBMs
UPS + 3 EBMs
UPS + 4 EBMs
3.
Press the
button to save the setting.
4.
Press the
button until the system status screen appears.
®
9140 EBM User's Guide
Number of Battery Packs
S
164201623 Rev A FINAL DRAFT 2006 July 14
2
3
4
5
27
Advertisement
Table of Contents
