Table of Contents
Advertisement
MAINTENANCE
4.
5.
6.
32
EATON Powerware
Push down and hold the battery tray lock to unlock the tray. Pull the
battery tray slowly out onto a flat, stable surface; use two hands to
support the tray.
Repeat for each battery tray in the cabinet. See "Recycling the
Used Battery or UPS" on page 34 for proper disposal.
Slide the new battery trays into the EBM cabinet (see Figure 15).
Push each tray in until the battery tray lock on the handle catches to
lock the tray in place.
Figure 15. Installing the Battery Trays
Replace the EBM front cover (see Figure 16) and tighten the two
front cover screws.
Figure 16. Replacing the EBM Front Cover
®
S
9140 EBM User's Guide
164201623 Rev A FINAL DRAFT 2006 July 14
Battery Tray
Lock
Advertisement
Table of Contents
