Starting the SC300
When dc power is applied to the SC300 (via the RXP connector YS11) the start-up sequence
begins.
Start-up screen
SC300 Operation using the Keypad and Screen
Keypad Access Security
SC300 System Controller
This feature prevents accidental or unauthorized changes to settings from the SC300 keypad.
Approx.
120s
Main screen
The values shown are
configurable, see details in the
System Controller Operation
Handbook. All active Critical,
Major, Minor and Warning
alarms are displayed.
All access to change an SC300's settings will be lost if:
•
All communications are disabled (see S3P Access and HTTP/HTTPS Access in the
System Controller Operation Handbook), and
•
Keypad access is Read Only, or PIN Protected and the keypad access PIN is lost.
The SC300 will continue to function, but no configuration changes can be made.
Contact your Eaton dc product supplier or Eaton for advice (see Worldwide Support
on page 103).
Copyright © 2018 Eaton Corporation. All Rights Reserved.
IPN 997-00012-10A2
Menu screen
See navigation details on page 77.
If Logon is required see Keypad
Access Security on page
LCD
Soft key 1 label
Soft key 1
Navigation keys (Up - Down -
Left - Right)
Soft key 2
Soft key 2 label
July 2018
System Controller
39.
39