Table of Contents
Advertisement
► To use a web browser for Restore
Connect to the SC300 via a web browser. For details see Ethernet Communications in the
1
System Controller Operation Handbook.
Go to Tools.
2
Select Restore Tool.
3
Select the file type:
4
System Snapshot (*.dcs): Configuration file including site specific settings.
•
Configuration (*.dcc): Configuration file without site specific settings - Site Identity, IP
•
Address, S3P Address, battery characterization data).
Fragment (*.dcf): Restore part of a configuration file (such as battery characterization
•
data).
Click Next, and then select a file name to Restore a configuration.
5
Starting the SC300
When dc power is applied to the SC300 (via the RXP connector YS11) the start-up sequence
begins.
Start-up screen
SC300 Operation using the Keypad and Screen
Approx.
120s
Main screen
The values shown are
configurable, see details in the
System Controller Operation
Handbook. All active Critical,
Major, Minor and Warning
alarms are displayed.
Copyright © 2007-2018 Eaton Corporation. All Rights Reserved.
IPN 997-00012-07A1
Menu screen
See navigation details on page 77.
If Logon is required see Keypad
Access Security on page 42.
LCD
Soft key 1 label
Soft key 1
Navigation keys (Up - Down -
Left - Right)
Soft key 2
Soft key 2 label
July 2018
System Controller
41
Advertisement
Table of Contents
