Table of Contents
Advertisement
Access Power Solutions Installation and Operation Guide (APS6-300/500 and APS12-300 Series)
SC200 or SC100 Operation using the Keypad and Screen
Keypad Access Security
SC200 System Controller
This feature prevents accidental or unauthorized changes to settings from the SC200 keypad.
All access to change an SC200's settings will be lost if:
The SC200 will continue to function, but no configuration changes can be made.
Contact your Eaton dc product supplier or Eaton for advice (see Worldwide Support
on page 107).
► To use DCTools/Web to enable/disable keypad access
In DCTools/Web go to Communications > Front Panel.
Set Access to:
Unprotected - keypad access is allowed to view and change parameters, or
Read Only - keypad access is allowed to view parameters only, or
PIN Protected - keypad access is allowed to view and change parameters if the correct
4-digit number is typed in the Access PIN field. Otherwise, Read Only access is allowed.
► To use the SC200 when access is set to PIN Protected
At the Main Screen press Menu. The Logon screen appears.
If the Access PIN is not known then press Skip to use the SC200 with Read Only access.
If the Access PIN is known:
Use the Left and Right keys to access each digit position. Use the Up and Down keys to
change the digits.
When the correct digits are entered, press Logon.
Keypad access will return to PIN Protected mode when the display returns to the Main
Screen.
44
All communications are disabled (see S3P Access and HTTP/HTTPS Access in
the System Controller Operation Handbook), and
Keypad access is Read Only, or PIN Protected and the keypad access PIN is lost.
Copyright © 2007-2013 Eaton Corporation. All Rights Reserved.
IPN 997-00012-49G
LCD
Soft key 1 label (SC200 only)
Soft key 1 (SC200 only)
Navigation keys (Up - Down -
Left - Right)
Soft key 2 (SC200 only)
Soft key 2 label (SC200 only)
May 2013
Advertisement
Table of Contents
