Marking The Rack For Proliant Bl E-Class System Installation - Compaq BL10e - HP ProLiant - 512 MB RAM Setup And Installation Manual

3. Align the rack template so that its sides are square with the sides of the rack.
IMPORTANT: Tick marks on the rack supports help you to maintain proper alignment of
the rack template.
4. Use a pencil to mark an "M" at the locations on the rack where the rack rails are
to be inserted (1).
5. On the rack, mark the top and bottom edges of the rack template to help align the
rack template for the next enclosure (2).
Figure 3-6: Marking the rack for ProLiant BL e-Class
system installation
6. Remove the rack template from the front of the rack and move to the back of the
rack.
7. Identify the back side of the rack template.
8. Repeat steps 2 through 5 for the back of the rack.
NOTE: Store the rack template for future use.
HP ProLiant BL e-Class System Setup and Installation Guide
Installing and Cabling the System
3-7