Enclosure Diagnostic Steps; Is The Power Led On Both Power Supplies Solid Green - Compaq BL10e - HP ProLiant - 512 MB RAM Setup And Installation Manual

Table D-1: Enclosure Diagnostic Steps
Question
Question 1: Is the power LED on both
power supplies solid green?
Question 2: Is the fault LED on both
power supplies off?
Question 3: Is the enclosure power LED
on the rear panel green?
Question 4: Is the enclosure health LED
on the front of the enclosure on?
Question 5: Is the local console
displaying information when connected to
the enclosure?
Question 6: Is the Integrated
Administrator health LED green?
Question 7: Is the fan health LED green?
CAUTION: Pressing the enclosure power button while the enclosure is running
shuts down the enclosure and all server blades.
Table D-2: Is the Power LED on Both Power Supplies Solid Green?
Answer Possible Reasons
No, they are The power supply is not
both off. connected to AC power or no
AC power is available.
HP ProLiant BL e-Class System Setup and Installation Guide
Action
If yes, continue to Question 2 of this table.
If no, see Table D-2.
If yes, continue to Question 3 of this table.
If no, see Table D-3.
If yes, continue to Question 4 of this table.
If no, see Table D-4.
If yes, continue to Question 5 of this table.
If no, see Table D-5.
If yes, use the displayed information for further
diagnosis.
If no, see table D-6.
If yes, continue to Question 7 of this table.
If no, see Table D-7.
If yes, and you are still unable to access the local
console, contact HP or an authorized service provider
for parts and service.
If no, see Table D-8.
Possible Solutions
Be sure that all power cords are connected to
the power supplies.
Be sure that all power cords are plugged into
working, grounded outlets.
Troubleshooting
continued
D-5