Table D-4: Is the Enclosure Power LED on the Rear Panel Green?
Answer
Possible Reasons
No, it is off.
The cable is not properly connected
between the fan backplane and the
power backplane.
The interconnect tray is not fully
inserted.
The Integrated Administrator module
is not properly seated.
The fan backplane assembly has
failed.
The connector on the power
backplane is damaged.
The power backplane has failed.
No, it is
The enclosure is in standby mode.
amber.
Yes, it is
green.
HP ProLiant BL e-Class System Setup and Installation Guide
Possible Solutions
Be sure that the connectors on the fan
cable are properly seated and not
damaged.
Remove and reseat the interconnect
tray.
Contact HP or an authorized service
provider for parts and service.
Push the enclosure power button on the
fan cage at the rear of the enclosure.
Caution: Pressing the enclosure power
button while the enclosure is running
shuts down the enclosure and all server
blades.
If the enclosure power LED is green, go
to table D-5.
Troubleshooting
D-9