Is The Enclosure Health Led On The Front Of The Enclosure On - Compaq BL10e - HP ProLiant - 512 MB RAM Setup And Installation Manual

Troubleshooting
Table D-5: Is the Enclosure Health LED on the Front of the Enclosure On?
Answer Possible Reasons
No, it is off. The enclosure status cable is
disconnected from the center wall
assembly or the enclosure status
assembly.
The enclosure status assembly or the
center wall assembly is not
functioning properly.
Yes, it is A system component is degraded, but
amber. the system is still functional.
Yes, it is red. A system component has a critical
failure.
Yes, it is The Integrated Administrator has not
green. detected any degraded or failed
components.
D-10
Possible Solutions
Securely attach the enclosure status
cable.
Contact HP or an authorized service
provider for parts and service.
Check the local or remote console for
error messages. Go to table D-6.
Check system fans. Go to Table D-8.
Contact HP or an authorized service
provider for parts and service.
Check the local or remote console for
error messages. Go to table D-6.
Check system fans. Go to Table D-8.
Contact HP or an authorized service
provider for parts and service.
Check the local or remote console for
error messages. Go to table D-6.
Contact HP or an authorized service
provider for parts and service.
HP ProLiant BL e-Class System Setup and Installation Guide