Pre-Diagnostic Steps; Important Safety Information; O Post Error Messages And Beep Codes (On; Symbols On Equipment - Compaq ML530R - HP ProLiant - 128 MB RAM Troubleshooting Manual

When additional information becomes necessary, use this section to identify websites and
supplemental documents that contain troubleshooting information.
•
Error messages (on page 93)
Use this section for a complete list of the following messages:
ADU error messages (on page 93)
o
POST error messages and beep codes (on page 123)
o
Event list error messages (on page 173)
o
HP BladeSystem infrastructure error codes
o
page 176)
Port 85 codes and iLO messages (on page 181)
o

Pre-diagnostic steps

WARNING:
information in the server documentation before removing, replacing, reseating, or modifying
system components.
IMPORTANT:
apply to the server you are troubleshooting. Refer to the server documentation for information on
procedures, hardware options, software tools, and operating systems supported by the server.
Review the important safety information (on page 14).
1.
Gather symptom information (on page 17).
2.
Prepare the server for diagnosis (on page 17).
3.
Use the Start diagnosis flowchart (on page 26) to begin the diagnostic process.
4.

Important safety information

Familiarize yourself with the safety information in the following sections before troubleshooting the server.
Important safety information
Before servicing this product, read the Important Safety Information document provided with the server.

Symbols on equipment

The following symbols may be placed on equipment to indicate the presence of potentially hazardous
conditions.
To avoid potential problems, ALWAYS read the warnings and cautionary
This guide provides information for multiple servers. Some information may not
This symbol indicates the presence of hazardous energy circuits or electric shock
hazards. Refer all servicing to qualified personnel.
WARNING: To reduce the risk of injury from electric shock hazards, do not open this
enclosure. Refer all maintenance, upgrades, and servicing to qualified personnel.
("HP BladeSystem p-Class infrastructure error codes" on
Getting started 14