Table of Contents
Advertisement
About Password
A password is required to configure the print server. When you
click OK in the setting dialog box or click the Return to Default
button, the Password dialog box appears.
1. To set a password or to change the current password, click
Change. The Administrator password dialog box appears.
2. When you set a password for the first time, leave the Old
Password box blank, and enter a password in the New
Password box and in the New Password (again) box (up to 20
characters). Then click OK. Passwords are case sensitive.
Note:
The same password is used for EpsonNet WinAssist,
MacAssist, and WebAssist.
Since the new password becomes effective after the data is sent
to the print server, enter the old password immediately after
changing the password.
If you forget your password, you need to initialize the print
server. See "Initializing the Print Server" on page 237 for
instructions.
EpsonNet WinAssist Configuration Utility
3
3
3
3
3
3
3
3
3
3
3
3
75
Advertisement
Table of Contents
