Epson C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server User Manual page 216

Note:
If you want to configure a protocol other than TCP/IP, see
"Configuration - Network Screens" on page 211.
4. Select the method for acquiring the IP address. When you
select Auto, DHCP becomes available and assigns an IP
address automatically. If you want to set the IP address
manually, select Manual.
Note:
The network administrator must confirm any changes made to
the IP address settings.
When Auto is selected, DHCP becomes available. To use the
DHCP server, make sure it is installed on your computer and
correctly configured. See your operating system's online help
for detailed instructions.
204
EpsonNet WebAssist