Changing of the Setting
There are three methods for changing the setting of the UB‐R03 connected with the network.
• Change the setting with a Web browser.
Settings can be changed by a computer on the same network. If you are changing many setting
items, change them another way.
• Change the setting using TMNet WinConfig V3 (USB connection).
This method is similar to the initial setting procedure. It is suited for setting with other
networks because the connection with the UB‐R03 is not cut.
• Change the setting using TMNet WinConfig V3 (By network).
It is suited for changing the setting in the same network.
Change using a Web browser
Change the setting of the UB‐R03 using a Web browser. It is suited for some changes in the same
network. After setting of the UB‐R03, the TM printer should be reset. If the UB‐R03 is set to
another network, the connection will be cut.
Change method
1
Boot the computer of the network.
46