Table of Contents
Advertisement
Note:
Be sure to initialize the print server when you install or reinstall the
print server.
Press the status sheet button
more than 20 seconds.
4. Turn off the printer.
5. Connect an Ethernet cable (Category 5 shielded twisted-pair
cable) to the RJ-45 connector on the print server, and then
connect its other end to the network.
c
Note:
You can use both 10Base-T and 100Base-TX. If you print a lot of
data, we recommend that you use a high-speed network of
100Base-TX with a light network traffic.
6. Turn on the printer.
32
How to Set Up the Print Server
Caution:
You must use a Category 5 shielded twisted-pair cable to
connect the print server to prevent malfunction.
Do not connect or disconnect the network cable when the
printer is on.
Do not connect the print server and the computer
directly. Be sure to use a HUB to connect the print server
to the network.
Advertisement
Table of Contents
