Table of Contents
Advertisement
11. Select the Register the network interface's address to DNS
server check box if you want to register the host name and
domain name to the DNS server through the DHCP server
that supports Dynamic DNS.
If you want to register the host name and the domain name
directly to the DNS server, select the Register directly to DNS
server check box.
12. Select the Use Universal Plug and Play check box if you want
to use the Universal Plug and Play function in Windows Me
or future operating systems.
Change the default Universal Plug and Play device name, if
desired. This device name is used for Windows that supports
the Universal Plug and Play function.
13. After changing the settings, click OK.
14. In the TCP/IP dialog box, click OK. The Password dialog box
appears.
15. Enter your password (up to 20 characters) and then click OK
to save the settings. If you are entering a password for the first
time, click Change Password and set the password. For
more information on passwords, see "About Password" on
page 94.
Follow the on-screen instructions. After the update is
complete, refresh the configuration by selecting Refresh from
the Device menu.
Caution:
c
Since it takes 2 or 3 minutes to send new settings to the print
server, wait until an on-screen message appears to indicate
that you can turn off your printer.
How to Set Up the Print Server
2
2
2
2
2
2
2
2
2
2
2
2
47
Advertisement
Table of Contents
