Table of Contents
Advertisement
TCP/IP
To use the printer in the TCP/IP environment, configure the print
server using the following screen.
Items
Method for specifying
the IP address
Set using PING
88
EpsonNet MacAssist Configuration Utility
Explanations
Select a method for specifying an IP address.
When you select Automatic, an IP address,
subnet mask, and default gateway are
automatically assigned by the DHCP server.
Note:
If the Dynamic DNS function is not supported, we
recommend that you select Manual and then
enter an IP address. This is because if you select
Automatic, the IP address of the print server
changes every time you turn on the printer so
that you need to change the printer port setting
accordingly.
Select this check box when setting the IP address
using the ping command. When not using the
ping command, clear this check box.
Advertisement
Table of Contents
