Epson C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server User Manual page 72

Items
Method for specifying
the IP address
Set using Automatic
Private IP Addressing
(APIPA)
Set using PING
IP Address
Subnet Mask
Default Gateway
Extended Settings
button
60
EpsonNet WinAssist Configuration Utility
Explanations
Select a method for specifying an IP address.
When you select Automatic, an IP address,
subnet mask, and default gateway are
automatically assigned by the DHCP server.
Note:
If the Dynamic DNS function is not supported, we
recommend that you select Manual and then
enter an IP address. This is because if you select
Automatic, the IP address of the print server
changes every time you turn on the printer so
that you need to change the printer port setting
accordingly.
Assigns a private IP address automatically even
when there is no DHCP server on your network.
It is dimmed if this function is not supported.
Select this check box when setting an IP address
using the ping command. When not using the
ping command, clear this check box.
Note:
Be sure to clear the check box when not using
ping; this prevents any unexpected change of
the IP address by EpsonNet WebManager.
Enter an IP address for the print server. Be sure
that the IP address is unique and does not
conflict with any other device on the network.
Enter the subnet mask of the IP address.
Enter the gateway address.
Click this button for extended settings such as
Dynamic DNS and Universal Plug and Play. If
both functions are not supported, this button is
dimmed.