Messages regarding paper
Roll printing is selected.
You have attempted to print a test print sheet or
other printer status information on a roll, but no roll
is loaded.
Roll printing is selected, but sheets are loaded.
A print job for rolls was received when a sheet is
loaded.
The roll is empty.
The roll is empty.
688 Error Message
Cause
Cause
Cause
Corrective Action
Load a roll and try printing again.
To print on a sheet instead, hold the Stop button for
more than a second to cancel printing, load a sheet,
and then print.
(→P.93)
Corrective Action
Press the Load/Eject button and remove the sheet.
(→P.154)
Load a roll and try printing again.
(→P.118)
Hold down the Stop button for a second or more to
cancel printing.
Corrective Action
Follow these steps to replace the used roll with a new
roll of the same type and size.
1.
Remove the roll.
(→P.120)
(→P.121)
(→P.122)
2.
Load the new roll.
(→P.115)
(→P.117)
(→P.118)
3.
If no barcode was printed on the roll, specify the
type of paper.
(→P.113)
4.
If no barcode was printed on the roll, specify the
paper length.
(→P.114)
5.
If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.