Canon imagePROGRAF iPF6000S User Manual page 651

Large format printer
Hide thumbs Also See for imagePROGRAF iPF6000S:
Table of Contents

Advertisement

12.
Holding the handles on both sides of the new Maintenance Cartridge (a), insert it completely,
keeping it level.
13.
Hold the Ejection Guide on both sides by the near end. Aligning the Ejection Guide with the
guides (a), insert it into the printer until it locks in place.
14.
Press the OK button.
The printer returns to the mode before replacement of the Maintenance Cartridge. If a message
is displayed advising you to replace the Maintenance Cartridge, printing is not possible. Make
sure that the Maintenance Cartridge is installed correctly.
If a print job was in progress when the Maintenance Cartridge was replaced, printing is resumed.
Important
Do not remove the Maintenance Cartridge during the rst ve seconds or so after the printer goes
back online. This may damage the Maintenance Cartridge.
If you replace the Maintenance Cartridge when the printer is off, do not remove the Maintenance
Cartridge during the rst ve seconds or so after you turn the printer on again after replacement.
This may damage the Maintenance Cartridge.
Maintenance Cartridge
Maintenance 637

Advertisement

Table of Contents
loading

Table of Contents