Other Messages; Error Exxx-Xxxx (X Represents A Letter Or Number); Hardware Error. Xxxxxxxx-Xxxx (X Represents A Letter Or Number); Prepare For Parts Replacement - Canon imagePROGRAF iPF6000S User Manual

Other Messages

GARO Wxxxx (x represents a number)

There is a problem with the print job.

ERROR Exxx-xxxx (x represents a letter or number)

An error requiring service may have occurred.
Hardware error. xxxxxxxx-xxxx (x represents a letter or
number)
The last portion of roll paper was used during a
print job. The paper was not advanced because the
trailing edge is taped to the roll.
Fastening tape or the Belt Stopper has not been
removed inside the Top Cover.
An error requiring service may have occurred.

Prepare for parts replacement.

It is almost time to replace consumables for which
service is required.
Cause
Cause
Cause
Cause
Corrective Action
Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired
printing results.
Corrective Action
Write down the error code and message, turn off the
printer, and contact your Canon dealer for assistance.
Corrective Action
Turn off the printer and remove the roll from the
printer before restoring power.
Turn off the printer, open the Top Cover and remove
the tape or the Belt Stopper before restoring power.
Turn off the printer and wait at least three seconds
before restoring the power.
If the message is displayed again, write down the
error code and message, turn off the printer, and
contact your Canon dealer for assistance.
Corrective Action
If Parts replacement time has passed. is displayed,
you can continue to use the printer for some time.
Contact your Canon dealer for assistance.
Other Messages
Error Message 703