Adjusting The Feed Amount - Canon imagePROGRAF iPF6000S User Manual

Adjusting the feed amount

Adjusting the feed amount
Adjusting the Feed Amount
If printed documents are affected by the following problems, try adjusting the feed amount.
•
Banding in different colors
•
Line length is not accurate in the direction paper is fed
To adjust the feed amount, do the following, in this order.
1.
Depending on the issue, change the Feed Priority setting for the particular type of paper.
(→P.577)
2.
Based on the Feed Priority setting, use Auto Band Adj., Manual Band Adj, or Adjust Length.
(→P.578) (→P.580) (→P.583)
3.
If additional ne-tuning is necessary after Auto Band Adj. or Manual Band Adj, use Fine Band
Adj. in the Menu Durng Prtng. (→P.582)
576 Adjustments for Better Print Quality