Frequently Asked Questions - Canon imagePROGRAF iPF6000S User Manual

Troubleshooting

Frequently Asked Questions

Frequently Asked Questions
This section presents frequently asked questions and answers. To view more detailed explanations, click the
hyperlinks in the answer column.
How do I print on a roll?
How do I print manually?
How do I switch between printing on a roll and
printing manually?
How do I change the paper type or size?
How do I cut the roll paper after printing?
How do I print without borders?
Question Answer
When printing on rolls, after loading the roll, specify
the paper type and length, both on the Control Panel
and in the printer driver.
ÞLoading and Printing on Rolls (→P.88)
When printing manually, specify the paper type and
size in the printer driver, and then load the paper.
ÞLoading and Printing on Sheets in the Paper Feed
Slot (→P.93)
Press the Feeder Selection button to switch the
paper source between the roll and a sheet.
ÞSelecting the Paper Source (→P.112)
Specify the type and size of paper, both on the
Control Panel and in the printer driver.
•
Specifying it in the Printer Driver
ÞSpecifying Paper in the Printer Driver (→P.224)
•
Specifying it on the Control Panel
Selecting the paper type
ÞSelecting the Paper Type (Roll) (→P.113)
ÞSelecting the Paper Type (Sheet) (→P.146)
Selecting the Paper Size
ÞSpecifying the Paper Length (Roll) (→P.114)
ÞSelecting the Paper Size (Sheet) (→P.147)
You can wait until ink dries before cutting the roll, and
you can cut rolls at a desired position.
ÞSpecifying the Cutting Method for Rolls (→P.132)
Borderless printing is possible on rolls. You can also
specify borderless printing in the printer driver by
adjusting the original size to match the paper size.
Borderless printing is not supported on sheets.
ÞBorderless Printing on Paper of Equivalent Size
(→P.266)
ÞBorderless Printing by Resizing Originals to Fit the
Roll Width (→P.273)
ÞBorderless Printing at Actual Size (→P.259)
Frequently Asked Questions
Troubleshooting 651