Canon imagePROGRAF iPF6000S User Manual page 65

First Level Second Level
HDD Information
*1: Available only if a roll is loaded.
*2: Available only if Chk Remain.Roll is On.
*3: Available if Feed Priority is Automatic or Print Length.
*4: Not displayed if IP Mode is Manual.
*5: For information on the types of paper the printer supports, refer to the Paper Reference Guide.
(→P.104) The paper type setting in the printer driver and related software (as well as on the Control
Panel ) is updated when you install the printer driver from the User Software CD-ROM or if you change
paper information by using the Media Conguration Tool. See the Media Conguration Tool Guide
(Windows) or Media Conguration Tool Guide (Macintosh).
*6: Not displayed if NetWare is Off.
*7: Not displayed if Auto Detect is On.
*8: Follows the setting in Date Format.
*9: Available after you have used Advanced Adj. in Auto Head Adj. once.
*10: Not displayed if IP Mode is Automatic.
*11: Follows the setting in Length Unit.
*12: Select Yes to restore Paper Details to the factory default values. Any paper type settings you
have changed on the Control Panel of the printer are restored to the original values when you install
the printer driver from the User Software CD-ROM or if you update paper information by using the
Media Conguration Tool.
Caution
•
Only the following menus are displayed during printing.
•
Menu Durng Prtng
Choose this menu to display Head Cleaning, Fine Band Adj., and Information.
•
Job Mgmt Menu
Choose this menu to display Job Management.
Third Level
User Name
Page Count
Job Status
Print Start Time
Print End Time
Print Time
Print Size
Media Type
Interface
Ink Consumed
HDDSpace
Fourth Level Fifth Level
yyyy/mm/dd
hh:mm
yyyy/mm/dd
hh:mm
sec.
xxxxxxxxsq.mm
xx.x ml
Control Panel
Printer Parts 51