Changing Channel Settings; Automatically Scanning For Channels; Selecting The Signal Source - Dynex DX-L26-10A User Manual

Changing channel settings

3 Press or to highlight Audio Only, then press
select On.
4 Press EXIT to close the menu.
Notes:
Audio Only works only when the input source is TV and your TV is receiving
a broadcast signal.
To exit Audio Only mode, press any button. When you exit Audio Only
mode, the Audio Only option is automatically reset to Off .
Changing channel settings

Automatically scanning for channels

To auto scan for channels:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight Channel, then press . The Channel
menu opens.
3 Press or to select Air or Cable.
or to 4 Press
confirmation box opens.
5 Press or to select Yes, then press ENTER to start the scan. A
progress box shows the progress of the scan.

Selecting the signal source

To select the signal source:
1 Press MENU. The on-screen menu opens.
2 Press
menu opens.
3 Press
4 Press EXIT to close the menu.
or to highlight Auto Scan, then press ENTER. A
or to highlight Channel, then press . The Channel
or to select Air or Cable.
19