Connecting An Antenna, Cable Tv, Or Satellite Tv Box; Connecting A Vcr - Dynex DX-L40-10A User Manual

40" lcd tv
Hide thumbs Also See for DX-L40-10A:
Table of Contents

Advertisement

DX-L40-10A_09-0537_MAN_ENG_V1.book Page 9 Tuesday, July 28, 2009 10:07 AM
Making connections
Connecting an antenna, cable TV, or
satellite TV box
Important: The antenna connector should only be
finger-tightened. Do not tighten this connector with any
tool, or you may damage your TV.
To connect an antenna, cable TV, or satellite TV box:
1 Turn off the TV before connecting the antenna.
2 Connect one end of a coaxial cable (not
included) to the RF OUT jack on the antenna or
on the cable or satellite TV box. If you are using
an antenna with twin-lead cable, you may need
a 300-75 ohm adapter (not provided) to
connect it to the back of your TV. Likewise, if
you are using several antennas, you may need a
combiner (not provided).
RF coaxial cable (75 ohm)
VHF, UHF, or
combination
antenna
RF coaxial cable (75 ohm)
Twin-lead flat cable
VHF antenna
UHF antenna
Twin-lead flat cable
RF coaxial cable (75 ohm)
ANT/CABLE IN jack (on
the side of the TV)
300-75 ohm Adapter
(not provided)
Home antenna

Connecting a VCR

terminal (75 ohm)
Combiner (not provided)
RF coaxial cable (75 ohm)
3 Connect the other end of the cable to the
ANT/CABLE IN jack on the side of your TV.
Antenna, cable
TV, or satellite box
Notes:
Use a coaxial cable to eliminate interference and noise from
radio waves.
Do not bundle the coaxial cable with the power cord or other
cables.
If the antenna is not installed correctly, contact qualified
service personnel to correct the problem.
To connect a VCR:
1 Make sure that your TV's power cord is
unplugged and the VCR is turned off.
2 Connect an AV cable to the AV VIDEO and
AUDIO out jacks on the VCR.
AV cable
HDMI3
HDMI2
AUDIO OUT    
 
   L
 R
L
R
COMP1
3 Connect the other end of the AV cable to the
AV2 VIDEO and L and R audio jacks on the back
of your TV.
9
DX-L40-10A
Side of TV
Note: Cables are often
color-coded to connectors.
Connect yellow to yellow,
red to red, and white to
white. Cables may be
separate or combined.
VGA
VGA
AUDIO IN
AV2
VIDEO   L
  R
Y
P
    L      R
L
R
B
R
COMP2
Back of TV

Advertisement

Table of Contents
loading

Table of Contents