Entry Into The Maintenance Mode - Brother IntelliFax-2600 Service Manual

1. ENTRY INTO THE MAINTENANCE MODE

FAX2600/MFC4300/MFC4600: To make the equipment enter the maintenance mode, press the
Function, *, 2, 8, 6, and 4 keys in this order.
FAX8060P/MFC9060:
Menu, *, 2, 8, 6, and 4 keys in this order.
Within 2 seconds
The equipment beeps for approx. one second and displays "
LCD, indicating that it is placed in the initial stage of the maintenance mode, a mode in which the
equipment is ready to accept entry from the keys.
To select one of the maintenance-mode functions listed in Section 2, enter the corresponding 2-
digit function code with the numerical keys on the control panel. (The details of each maintenance-
mode function are described in Section 3.)
NOTES: • Pressing the 9 key twice in the initial stage of the maintenance mode makes the
• Pressing the Stop key after entering only one digit restores the equipment to the initial
• If an invalid function code is entered, the equipment resumes the initial stage of the
Within 2 seconds
To make the equipment enter the maintenance mode, press the
equipment exit from the maintenance mode, restoring it to the standby state.
stage of the maintenance mode.
maintenance mode.
V - 1
" on the