Brother IntelliFax-2600 Service Manual page 90

WSW No.
WSW37
WSW38
WSW39
WSW40
WSW41
WSW42
WSW43
WSW44
WSW45
WSW46
WSW47
WSW48
WSW49
WSW50
Operating Procedure
(1) Press the 1 and 0 keys in this order in the initial stage of the maintenance mode.
The equipment displays the "WSW00" on the LCD and becomes ready to accept a firmware
switch number.
(2) Enter the desired number from the firmware switch numbers (01 through 36).
The following appears on the LCD:
WSWXX = 0 0 0 0 0 0 0 0
(3) Use the
(4) Enter the desired number using the 0 and 1 keys.
(5) Press the Set key. This operation saves the newly entered selector values onto the EEPROM
and readies the equipment for accepting a firmware switch number.
(6) Repeat steps (2) through (5) until the modification for the desired firmware switches is
completed.
(7) Press the Set or Stop key to return the equipment to the initial stage of the maintenance
mode.
NOTES: • To cancel this operation and return the equipment to the initial stage of the
maintenance mode during the above procedure, press the Stop key.
• If there is a pause of more than one minute after a single-digit number is entered for
double-digit firmware switch numbers, the equipment will automatically return to the
initial stage of the maintenance mode.
Note
The user-accessible selectors of the firmware switches are shaded in the tables given on the
following pages.
Firmware Switches (WSW01 through WSW50) Continued
Not used.
Not used.
Not used.
Not used.
Not used.
Not used.
Not used.
Not used.
Function setting 23
Function setting 24
Function setting 25
Function setting 26
Function setting 27
Function setting 28
and keys to move the cursor to the selector position to be modified.
Function
V - 10
Reference Page
V-49
V-49
V-49
V-49
V-49
V-49
V-49
V-49
V-49
V-49
V-49
V-50
V-50
V-50