Brother IntelliFax-2600 Service Manual page 150

(9) Signal isolation
Code 1
90
90
(10) Video signal reception
Code 1
A0
A0
A0
A0
A0
A0
A0
A0
A0
A8
A9
(11) General communications-related
Code 1
B0
B0
B0
Code 2
01 Unable to detect video signals and commands within 6 seconds
after CFR is transmitted.
02 Received PPS containing invalid page count or block count.
Code 2
03 Error correction sequence not terminated even at the final
transmission speed for fallback.
11 Receive buffer empty. (5-second time-out)
12 Receive buffer full during operation except receiving into memory.
13 Decoding error continued on 500 lines.
14 Decoding error continued for 10 seconds.
15 Time-out: Five seconds or more for one-line transmission.
16 RTC not found and carrier OFF signal detected for 6 seconds.
17 RTC found but no command detected for 60 seconds.
18 Receive buffer full during receiving into memory.
01 RTN, PIN, or ERR received at the calling terminal.*
01 RTN, PIN, or ERR received at the called terminal.*
Code 2
02 Unable to receive the next-page data.
03 Unable to receive polling even during turn-around transmission
due to call reservation.
04 PC interface error.
Causes
Causes
* Available in Germany and Austria only
Causes
VI - 11