Brother IntelliFax-2600 Service Manual page 93

Selector
No.
CNG detection when sharing a
modular wall socket with a
1
telephone
2 Min. detection time length of
PABX* dial tone, required for
|
starting dialing
4
CNG detection when sharing a
modular wall socket with a
5
telephone
6
Dial tone detection in PABX*
7
8 "R" key function
NOTE: Selectors 2 through 4 and 6 through 8 are not applicable where no PABX is installed.
Selectors 1 and 5: CNG detection when sharing a modular wall socket with a telephone
These selectors determine whether or not the equipment detects a CNG signal when a line is
connected to a telephone sharing a modular wall socket with the equipment. Upon detection of
CNG signals by the number of cycles specified by these selectors, the equipment interprets CNG
as an effective signal and then starts FAX reception.
Selector
No. 1 No. 5
0 (A) 0 (A)
0 (A) 1 (B)
1 (B) 0 (A)
1 (B) 1 (B)
Selectors 2 through 4:
Upon detection of the PABX dial tone for the time length set by these selectors, the equipment
starts dialing.
These selectors are effective only when both selectors 6 and 7 are set to "1" (Detection).
WSW03
(PABX* mode setting)
Function
0.5 cycle
1.0 cycle
1.5 cycles
2.0 cycles
Min. detection time length of PABX dial tone, required for starting dialing
V - 13
Setting and Specifications
0: A
No. 2 3 4
0 0 0 :
0 0 1 :
0 1 0 :
0 1 1 :
1 0 0 :
1 0 1 :
1 1 0 :
1 1 1 :
0: A
No. 6 7
0 0 : No detection
0 1 : No detection
1 0 : No detection
1 1 : Detection
0: 1st dial tone
detection add
* PABX: Private automatic branch exchange
Cycle
1: B
50 ms
210 ms
500 ms
800 ms
900 ms
1.5 sec.
2.0 sec.
2.5 sec.
1: B
(3.5 sec. WAIT)
(5 sec. WAIT)
(7 sec. WAIT)
(Frequency only)
1: No 1st dial
tone detection