Brother IntelliFax-2600 Service Manual page 56

(5) Disassemble the handset mount by unhooking two latches "a" of the upper handset mount with
a flat screwdriver.
(6) Remove the hook switch PCB ASSY by unhooking latch "b."
(7) Disconnect the hook switch harness from the hook switch PCB.
Reassembling Notes
• When assembling the upper and lower handset mounts, route the hook switch harness
underneath the hook switch PCB and through the cutout as shown above. Take care not to
pinch the harness between the upper and lower mounts.
IV - 24