Lights - Lexmark 4227 - Forms Printer B/W Dot-matrix Service Manual

4227-300

Lights

Light
Power (Green)
Ready (Green)
Check (Yellow)
Auto Gap (Green)
Tractor 2 (Green)
Description
The printer power is on.
The printer is online and ready to print.
The following conditions cause the Ready light
to turn off:
• Pressing Start/Stop
• An end-of-form (EOF)
• A paper jam
• A cover open
• A hardware error
• A Power-On Self Test failure
• The printer is offline.
Any of the following conditions may have
occurred:
• An end-of-form (EOF)
• A paper jam
• A cover open
• A hardware error
• A data transmission error
• An interface mode error
• A Power-On Self Test (POST)
failure
Auto Gap is on. Auto Gap automatically adjusts
the printer according to the thickness of the
paper you are using.
The Tractor 2 Feeder is selected. (The Tractor
2 Feeder option must be installed.)
General information
1-11