4227-300
Buttons
When using the function menus, press Item ↓ or Item ↑ to scroll
through the menu items. Press Next → or Prev. ← to move to the
next, or previous menu level.
Press
Menu
Quit
Tear Off
Store
Font
↓
Item
Pitch
↑
Item
↓
Micro
→
Next
↑
Micro
←
Prev.
Start/Stop
Load/Unload
LineFeed
FormFeed
1-10
Service Manual
To
Enter the function menu. The printer goes
offline.
• Exit the function menus.
• Run a Power-On Self Test (POST).
• Advance the forms to the tear-off position.
• Retract the forms to the Top-of-Form (TOF)
position when the forms are at the tear-off
position.
Save the values selected in the menus.
Select a font.
Scroll down.
Select a pitch.
Scroll up.
Advance the forms down 0.35 mm (1/72 in.).
Scroll forward.
Advance the forms up 0.35 mm (1/72 in.).
Return to the previous function menu.
• To return to Ready and to Start/Stop.
• Load the forms to TOF position with the
ready light on.
• Load paper (cut or continuous forms) to the
TOF position.
• Retract the forms to the tractor position.
Advance the paper to the next line.
• Advance the paper to the TOF position on
the next page.
• Load the forms to the TOF position.