Left Side Frame Removal - Lexmark 2380 - Forms Printer B/W Dot-matrix Service Manual

Left Side Frame Removal

1. Remove the tractor assembly
see "Push Tractor Assembly Removal" on page
2. Remove the top cover
see "Top Cover Removal" on page
3. Remove the pull tractor actuator
see "Pull Tractor Actuator Removal" on page
4. Remove the printhead
see "Printhead Removal" on page
5. Remove the sub logic board
see "Sub Logic Board Removal" on page
6. Remove the paper feed motor and paper feed motor plate
see "Paper Guide / Platen Assembly Removal" on page
7. Remove the carrier motor assembly
see "Carrier Motor Assembly Removal" on page
8. Remove the carrier see
9. Remove the upper feed roller
see "Upper Feed Roller Removal" on page
10. Remove the lower pinch roller
see "Lower Pinch Roller Removal" on page
11. Remove the print unit see
12. Remove the home position sensor
see "Home Position Sensor Removal" on page
13. Remove the pull tractor sensor
see ""Pull Tractor Sensor Removal" on page
14. 238X-001 - Remove the head gap sensor
see "Head Gap Sensor Removal (238X-001)" on page
23XX-002, 003 - Remove the head gap sensor assembly
see "Head Gap Sensor Removal (23XX-002, 003)" on page
4-24.
15. Remove the large idler gear [7] by inserting a small blade
screwdriver between the gear and the side frame and twisting.
16. 23XX-002, 003 - Remove the screw [8] that was covered by the
gear and remove the metal support plate. Remove the platen
bar screw [8] that was covered by the support plate.
23XX-001 printers have only one screw to remove.
17. 238X-XXX - Remove the idler gear [1].
18. Remove the lower left feed roller gear [2].
19. Release the latch, and then remove the left lower bushing [3].
4-28
4-61.
4-48.
"Carrier Removal" on page
"Print Unit Removal" on page
4-53.
4-51.
4-59.
4-40.
4-16.
4-12.
4-66.
4-32.
4-47.
4-25.
4-52.
4-23.