Tractor 2 Cable Connectors - Lexmark 2380 - Forms Printer B/W Dot-matrix Service Manual

Tractor 2 Cable Connectors

The Tractor 2 cable is soldered to the board at CN1; there is no
connector.
Connector
CN1-1
CN1-2
CN1-3
CN1-4
CN1-5
CN1-6
CN1-7
CN1-8
CN1-9
CN1-10
CN1-11
CN1-12
CN1-13
5-4
+26 V dc.
+ 26 V dc.
Frame GND.
Not Used.
+5 V dc.
Motor Common.
D-Set (Signal for Tractor 2 Plugged in).
Signal GND.
Motor Phase A; 0 V dc except when Tractor 2 motor
is on.
Motor Phase B; +5 V dc when Tractor 2 not in use;
0 V dc when Tractor 2 is in use.
Not used.
Slider Home Sensor; + 5 V dc when open, 0 V dc
when closed.
Tractor 2 In-Place Sensor; +5 V dc when open,
0 V dc when closed.
Mode