Opening The Blade Server Cover; Removing The Blade Server Bezel Assembly - IBM HS40 - BladeCenter - 8839 Installation And User Manual

Opening the blade server cover

The following illustration shows how to open the cover on the blade server.
Cover
pins
Air baffle
Complete the following steps to open the blade server cover:
1. Read the safety information beginning on page vii and "Installation guidelines"
2. Carefully lay the blade server down on a flat, static-protective surface, with the
3. Press the blade-cover release on each side of the blade server and lift the
4. Lay the cover flat, or lift it from the blade server.
Statement 21:
CAUTION:
Hazardous energy is present when the blade server is connected to the power
source. Always replace the blade cover before installing the blade server.

Removing the blade server bezel assembly

To install certain options, you must first remove the blade server bezel assembly.
Complete the following steps to remove the blade server bezel assembly:
1. Read the safety information beginning on page vii and "Installation guidelines"
2. Open the blade server cover (see "Opening the blade server cover" for
24
BladeCenter HS40 Type 8839: Installation and User's Guide
Blade-cover
release
on page 21.
cover side up.
cover open, as shown in the illustration.
on page 21.
instructions) and lift it off the blade server.
Blade cover
Blade-cover
release