Major Components Of The Bladecenter Hs40 Type 8839 Blade Server - IBM HS40 - BladeCenter - 8839 Installation And User Manual

IBM Director also provides an extensible platform that supports advanced server
tools that are designed to reduce the total cost of managing and supporting
networked systems. By deploying IBM Director, you can achieve reductions in
ownership costs through:
v Reduced downtime
v Increased productivity of IT personnel and users
v Reduced service and support costs
For more information about IBM Director, see the documentation on the IBM
Director CD that comes with the BladeCenter unit or go to the IBM xSeries Systems
Management Web page at
http://www.ibm.com/servers/eserver/xseries/systems_management/xseries_sm.html.
This Web page presents an overview of IBM Systems Management and IBM
Director.

Major components of the BladeCenter HS40 Type 8839 blade server

You must remove the blade server from the BladeCenter unit and remove the blade
server cover to see the components.
The following illustration shows the major components in the BladeCenter HS40
blade server.
Note: The illustrations in this document might differ slightly from your hardware.
Microprocessor
heat-sink
(up to 4)
Blade expansion
connector terminator
Air baffle
Microprocessor
(up to 4)
Microprocessor
heat-sink filler
(up to 3)
Bezel
or
Bezel
Top cover
I/O board
DIMM
(up to 8)
Processor board
Chapter 1. Introduction
11