IBM HS40 - BladeCenter - 8839 Maintenance And Troubleshooting Manual page 66

10. Turn on the blade server.
11. If you have not already done so, install the LSI SCSI device drivers for your
56
BladeCenter HS40 Type 8839: Hardware Maintenance Manual and Troubleshooting Guide
c. Pivot the storage expansion unit closed, and press it firmly into place until
the cover-release latches click. The connector on the expansion unit
automatically aligns with and connects to the blade expansion connector
(J3A1) on the processor board.
9. Insert the combined blade and expansion unit into three adjacent BladeCenter
unit bays.
Note: When any blade server or option is in blade bay 7 through 14 (in the
BladeCenter unit) or blade bay 5 through 8 (in the BladeCenter T unit),
power modules must be present in all four power bays.
operating system. LSI device drivers are on the ServerGuide Setup and