Bladecenter Hs40 Specifications For Nebs/Etsi Environments - IBM HS40 - BladeCenter - 8839 Maintenance And Troubleshooting Manual

BladeCenter HS40 specifications for NEBS/ETSI environments

The following table provides a summary of the features and specifications of the
BladeCenter T HS40 Type 8839 blade server operating in a NEBS/ETSI
environment.
Note: Power, cooling, removable-media drives, external ports, and advanced
Microprocessor:
Supports up to 4 microprocessors
v Intel Xeon 2.0 GHz or faster
v L2 and L3 caches, size dependant
on microprocessor
Memory:
v Eight double data rate (DDR)
PC2100 184-pin DIMM sockets
v Minimum: 512 MB
1
v Maximum: 16 GB
v Type: 2-way interleaved, DDR,
PC2100, ECC SDRAM registered
x4 (Chipkill) dual inline memory
modules (DIMMs) only
v Supports 256 MB, 512 MB, 1 GB,
and 2 GB DIMMs
v Hot Spare memory
Expansion:
Two I/O expansion card
connectors
Drives:
Support for up to two Ultra320
SCSI hot-swap hard disk drives
available in an optional SCSI
storage expansion unit
Notes:
1. You might have to enable large-memory support for your operating system to
2. The operating system in the blade server must provide USB support for the
system management are provided by the IBM Eserver BladeCenter T Type
8720.
Size:
v Height: 24.5 cm (9.7 inches)
v Depth: 44.6 cm (17.6 inches)
v Width: 5.9 cm (2.32 inches)
v Maximum weight: 7.0 kg (15.4 lb)
Integrated functions:
v Four Gigabit Ethernet controllers
v ATI Radeon 7000 video controller
v Light path diagnostics
v Local service processor
v IDE hard disk drive controller (the
IDE controller is reserved for
future use and is not available for
this server type)
v RS-485 interface for
communication with management
module
v Integrated Baseboard
Management Controller
v Universal Serial Bus (USB) v1.1
for communication with keyboard,
mouse, diskette drive, and
CD-ROM drive
v Serial over LAN (SOL)
management interface
Electrical input:
Input power: 400 W, maximum
access all of the memory that is installed in your blade server. See the
documentation for your operating system for information.
blade server to recognize and use the keyboard, mouse, CD-ROM drive, and an
external diskette drive. The BladeCenter T unit uses USB for internal
communications with these devices.
Predictive Failure Analysis (PFA)
alerts:
v Microprocessor
v Memory
v Hard disk drives
Environment (NEBS):
v Air temperature:
– Blade server on: 5° to 40°C (41°
– Blade server on (short term): -5°
– Blade server on: 5° to 30°C (41°
– Blade server on (short term): -5°
– Blade server off: -40° to 70°C
v Humidity:
– Blade server on: 5% to 80%
– Blade server on (short term): 5%
2
– Blade server off: uncontrolled
Note: "Short term" refers to a period
of not more than 96 consecutive hours
and a total of not more than 15 days in
1 year. (This refers to a total of 360
hours in any given year, but no more
than 15 occurrences during that 1-year
period.)
to 104°F). Altitude: -60 to 1800 m
(-197 to 6000 ft)
to 55°C (23° to 131°F) Altitude:
-60 to 1800 m (-197 to 6000 ft)
to 86°F). Altitude: 1800 to 4000 m
(6000 to 13 000 ft)
to 45°C (23° to 113°F). Altitude:
1800 to 4000 m (6000 to 13 000
ft)
(-40° to 158°F)
to 90% but not to exceed 0.024
kg water/kg of dry air
Chapter 1. Introduction
5