Chapter 1. Introduction - IBM HS40 - BladeCenter - 8839 Maintenance And Troubleshooting Manual

Chapter 1. Introduction

The IBM BladeCenter HS40 Type 8839 blade server is based on the IBM Enterprise
X-Architecture
The HS40 blade server is a double-width blade-model server and can be installed
in an IBM Eserver BladeCenter Type 8677 unit or IBM Eserver BladeCenter T
Types 8720 and 8730 units.
Note: Unless otherwise stated, references to the BladeCenter unit also apply to the
A combination of single-width HS20 blade servers and double-width HS40 blade
servers can be installed in the same BladeCenter unit. These high-performance
blade servers are ideally suited for networking environments that require superior
microprocessor performance, efficient memory management, flexibility, and reliable
data storage.
This Hardware Maintenance Manual and Troubleshooting Guide and other
publications that provide detailed information about your blade server are provided
in Portable Document Format (PDF) on the IBM BladeCenter Documentation CD.
The machine type, model number, and serial number are on the ID label that is
behind the control-panel door on the front of the blade server and on a label on the
left side of the blade server that is visible when the blade server is not in the
BladeCenter unit. You will need these numbers when you register your blade server
with IBM.
Note: The illustrations in this document might differ slightly from your hardware.
Release
levers
A set of user labels comes with the blade server. When you install the blade server
in the BladeCenter unit, write identifying information on a label and place the label
on the BladeCenter unit bezel.
1. Enterprise X-Architecture technology takes full advantage of existing IBM technologies to build powerful, scalable, and reliable
™
Intel processor-based servers. For more information about IBM Enterprise X-Architecture, go to
http://www.ibm.com/pc/us/eserver/xseries/xarchitecture/enterprise/index.html.
© Copyright IBM Corp. 2004
™ 1
technologies .
BladeCenter T unit.
Release
button
1