Taking Pictures Using The Built-In Flash; Switching To The Appropriate Flash Setting - Panasonic Lumix DMC-TS4 Owner's Manual

Applicable modes:

Taking Pictures Using the Built-in Flash

Switching to the appropriate flash setting

Set the flash to match the recording.
Press 1 [‰].
Press 3/4 to select the item and then press
[MENU/SET].
Item
[‡] ([Auto])
¢1
[ ] ([iAuto])
[ ]
¢2
([Auto/Red-Eye])
[‰]
([Forced Flash On])
[ ]
([Slow Sync./Red-Eye])
[Œ]
([Forced Flash Off])
¢1 This can be set only when Intelligent Auto Mode is set. The icon changes depending on the
type of subject and brightness.
¢2 The flash is activated twice. The subject should not move until the second flash is
activated. Interval until the second flash depends on the brightness of the subject.
[Red-Eye Removal]
icon.
Recording
A Photo flash
Do not cover the flash with your fingers or other objects.
The flash is automatically activated when the recording
conditions make it necessary.
The flash is automatically activated when the recording
conditions make it necessary.
It is activated once before the actual recording to reduce the
red-eye phenomenon (eyes of the subject appearing red in
the picture) and then activated again for the actual recording.
•
Use this when you take pictures of people in low
lighting conditions.
The flash is activated every time regardless of the recording
conditions.
•
Use this when your subject is back-lit or under
fluorescent light.
If you take a picture with a dark background landscape, this
feature will slow the shutter speed when the flash is activated
so that the dark background landscape will become bright.
¢2
Simultaneously it reduces the red-eye phenomenon.
•
Use this when you take pictures of people in front of a
dark background.
The flash is not activated in any recording conditions.
•
Use this when you take pictures in places where the use
of the flash is not permitted.
(P37)
(P109) on the [Rec] menu is set to [ON], [
Description of settings
- 65 -
] appears on the flash