Update The Gps Information - Panasonic Lumix DMC-TS4 Owner's Manual

Update the GPS information

When the displayed location name information is different from the current location or
when the positioning is not successful, move to a location where the radio waves from
GPS satellites can be received better and perform the positioning update.
• When significant time has elapsed since the last successful positioning ([
[ ] are displayed), we recommend performing a positioning update.
Select [Repositioning] on the [GPS/Sensor] menu, and then press [MENU/
SET].
•
Positioning is started and the current location information is updated once the positioning is
successful.
•
Positioning also can be updated by selecting [
pressing [MENU/SET].
∫ Checking the GPS reception status before updating
1
Select [GPS Setting] on the [GPS/Sensor] menu, and then press [MENU/SET].
2
Press 3/4 to select [INFO] and then press [MENU/SET].
•
Last updated positioning result is displayed.
Time positioning was performed
[ ]
Number of GPS satellites received from
[ ]
Latitude
[ ]
Longitude
3
Press [MENU/SET] in the information confirmation screen.
•
Positioning is started and the current location information is updated once the positioning
is successful.
∫ About automatic updating of positioning
•
Even if you do not perform [Repositioning], it will perform the positioning automatically right
after the power is turned on, and in constant time intervals.
•
When [GPS Setting] is set to [ON], the unit will continue to perform the positioning at a constant
time interval even if the power is turned off. Note that if [Airplane Mode] has been set to [ON],
positioning will not be performed when the power is turned off.
•
Positioning with the power turned off is canceled in the following cases:
–
When the remaining battery power becomes [
–
When the power is not turned on for a specific period of time
GPS/Sensor
] from the Quick Menu (P48), and then
]
- 118 -
], [ ], [ ] and