Panasonic Lumix DMC-TS4 Owner's Manual page 201

TV, PC and printer
The picture does not appear on the television.
• Is the camera connected to the TV correctly?
> Set the TV input to External Input Mode.
The display areas on the TV screen and the camera's LCD monitor are different.
•
Depending on the TV model, the pictures may be extended horizontally or vertically or they
may be displayed with their edges cut off.
The motion pictures cannot be played back on a TV.
•
Are you trying to play back the motion pictures by directly inserting the card in the card slot of
the TV?
> Connect the camera to the TV with the AV cable (supplied), or with the HDMI micro cable
(optional), and then play back the motion pictures on the camera.
The picture is not displayed fully on the TV.
> Check [TV Aspect] setting.
VIERA Link does not work.
•
Is it connected properly with the HDMI micro cable (optional)?
> Confirm that the HDMI micro cable (optional) is firmly fitted.
> Press [(] on this unit.
•
Is the [VIERA Link] on this unit set to [ON]?
> Depending on HDMI terminal of the TV, the input channel may not switch automatically. In
this case, use the remote control for the TV to switch input. (For details on how to switch
input, please read the operating instructions for the TV.)
> Check the VIERA Link setting on the connected device.
> Turn the power to the unit off and then back on again.
> Set [HDAVI Control] to [Off] on the TV and then turn it back to [On]. (Refer to the operating
instructions of the TV for details.)
The picture cannot be transferred when the camera is connected to a PC.
•
Is the camera connected to the PC correctly?
•
Is the camera recognized by the PC correctly?
> Set to [PC] in [USB Mode]. (P58,
Others
(P58)
(P59)
165)
- 201 -
(P155)
(P155)