Panasonic Lumix DMC-TS4 Owner's Manual page 204

The lens clicks.
•
When the brightness changes due to zoom or camera movement etc., the lens may click and
the picture on the screen may drastically change. However, the picture is not affected. The
sound is caused by the automatic adjustment of the aperture. This is not a malfunction.
The clock is reset.
•
If you do not use the camera for a long time, the clock may be reset.
> [Please set the clock] message will be displayed; please reset the clock.
Zooming stops instantaneously.
• When using the Extended Optical Zoom, the zooming action will stop temporarily. This is not a
malfunction.
Zoom does not go up to maximum magnification.
•
Is the camera set to Macro Zoom Mode?
Maximum zoom during Macro Zoom Mode is 3k digital zoom.
The file numbers are not recorded consecutively.
•
When you perform an operation after taking a certain action, the pictures may be recorded in
folders with different numbers from the ones used prior to the operation.
The file numbers are recorded in ascending order.
•
If the battery was inserted or removed without first turning the camera's power off, the folder
and file numbers for the pictures taken will not be stored in the memory. When the power is
then turned back on and pictures are taken, they may be stored under file numbers which
should have been assigned to previous pictures.
When the camera is left alone, the slide show is suddenly displayed.
•
This is the [Auto Demo] to introduce the features of the camera. Press a button to return the
camera to the original screen.
Bearing information measured with this unit is different from the public bearing
indications.
•
When [GPS Setting] is set to [OFF], magnetic declination is not corrected.
> Perform [Repositioning] of [GPS/Sensor] menu (P118), and acquire correct latitude/
longitude of the current location.
Others
(P68)
- 204 -
(P27)