Viewing the altimeter log
You can specify the period of the recorded altimeter log to display.
Select [Altimeter] on the [GPS/Sensor] menu, and then press [MENU/
SET].
Press 3/4 to select [Display Log], and then press [MENU/SET].
Press 3/4 to select the recording start date, and
press [MENU/SET].
Press 3/4/2/1 to select a date at which to start
the period to display, and press [MENU/SET].
•
It will not be displayed, if the date to start and the date to finish
is the same.
∫ About the altitude graph
The altitude graph is displayed with the highest altitude in the log as
the upper limit and the lowest altitude as the lower limit.
[W]/[T] Switches between the 12 hour display and the 48 hour display
Moves the log left and right
2/1
•
Move the log in units of 3 hours on the 12 hour display.
•
Move the log in units of 12 hours on the 48 hour display.
GPS/Sensor
- 126 -