Changing The Clock Setting - Panasonic Lumix DMC-TS4 Owner's Manual

Press [MENU/SET].
•
Confirmation screen is displayed. Press [MENU/SET].
Select [Yes] to automatically correct the clock, and then press
[MENU/SET].
•
Message screen is displayed. Press [MENU/SET].
Press 2/1 to select the home area, and
then press [MENU/SET].
•
Confirmation screen to operate the altimeter,
barometer and compass is displayed. Select [Yes] to
operate them.

Changing the clock setting

Select [Clock Set] in the [Rec] or [Setup] menu, and press [MENU/SET].
•
The clock can be reset as shown in steps
•
The clock setting is maintained for 3 months using the built-in clock battery even
without the battery. (Leave the charged battery in the unit for 24 hours to charge the
built-in battery.)
Note
•
If the clock is not set, the correct date cannot be printed when you order a photo studio to print
the picture, or when you stamp the date on the pictures with [Date Stamp]
Stamp] (P143).
•
If the clock is set, the correct date can be printed even if the date is not displayed on the screen
of the camera.
•
When [GPS Setting] is set to [ON], the GPS function will operate even when the power is
turned off. Electromagnetic waves, etc. from this unit may affect other electronic
devices, so set [GPS Setting] to [OFF] or [Airplane Mode] to [ON] and turn the unit off
when you carry this unit onboard an airplane or inside a hospital, etc.
Preparation
5 6
and .
- 28 -
(P46)
(P110) or [Text