[Beach & Snorkeling]
This is optimal for taking pictures underwater and at the beach. Depth meter will
automatically operate. It can be a rough indication of how deep you have gone
underwater.
Press [MODE].
Press 3/4/2/1 to select [Beach & Snorkeling], and then press
[MENU/SET].
∫ About the [Depth indicator]
Make sure to perform [Depth indicator] in [GPS/Sensor] menu to set the depth meter
before you dive underwater.
1
Press [MENU/SET].
2
Press 3/4/2/1 to select [GPS/Sensor] menu, and then press [MENU/SET].
3
Press 3/4 to select [Depth indicator], and then press [MENU/SET].
•
Confirmation screen is displayed. Depth meter will be set to 0 m (0 feet) when [Yes] is
selected. Exit the menu once completed.
∫ About the screen display underwater
When [DISP.] is pressed several times, the environment information
screen for the depth meter, etc. is displayed.
A Depth meter
•
Depth meter will display the depth to 12 m (40 feet) in 3 levels.
When the third level is flashing
Entire depth meter is flashing
•
Camera will automatically set to the optimal picture quality for underwater from the depth
information. Icons showing the picture quality will switch in such a case.
It is adjusted to optimal picture quality for underwater up to a depth of 3 m (10 feet)
[
]
when [
] is displayed.
It is adjusted to optimal picture quality for underwater for a depth of 3 m (10 feet) to
[
]
12 m (40 feet) when [
∫ About the white balance
You can adjust the hue to your preferred setting using [WB Adjust.] (P97).
Recording
You are approaching a depth of 12 m (40 feet), which is the
diving limit of this unit. Please be aware.
There is risk that depth has exceeded 12 m (40 feet).
] is displayed.
- 74 -
A