[Underwater] - Panasonic Lumix DMC-TS4 Owner's Manual

[Underwater]

This is optimal for taking pictures underwater deeper than 12 m (40 feet) by the use of the
marine case (DMW-MCFT3: optional).
¢ This camera has a waterproof/dustproof function equivalent to "IP68". It is possible to take
pictures in 12 m (40 feet) depth for 60 minutes.
Press [MODE].
Press 3/4/2/1 to select [Underwater], and then press [MENU/SET].
∫ Fixing the focus underwater (AF Lock)
You can fix the focus before taking a picture with AF lock. This is useful if you want to take
pictures of a fast moving subject, etc.
1
Aim the AF area at the subject.
2
Press 2 to fix the focus.
•
The AF lock icon appears when the subject is focused.
Press 2 again to cancel AF lock.
•
•
When you press the zoom button, the AF lock is canceled. In this case, focus on the subject
and fix the focus again.
•
You cannot set to AF lock when [AF Mode] is set to [
∫ About the white balance
You can adjust the hue to your preferred setting using [WB Adjust.] (P97).
Note
•
To prevent water leakage, make sure that there are no foreign objects, such as sand, hair, dust,
etc., clamped and close the side door all the way until it clicks. Also, read
the Waterproof/Dustproof and Anti-shock Performance of the Camera
camera.
•
Dip the camera in fresh water in a shallow container for 10 minutes or less after using it, then
wipe the water off with a soft, dry cloth.
•
Positioning is not possible underwater, because the GPS signals cannot reach the
camera.
• When there is a significant amount of matter floating in the water, set the flash to [Œ].
Recording
].
(P11)
- 76 -
"
(Important) About
"
(P8) before using the